Clone Trooper Paint Scheme Design Drawings Custom

"Generation One armor ever holds up."

―Male monarch ^[xiii]

Clone trooper armor, as well known as clone armor or Generation One armor, was the armor used by Galactic Democracy clone troopers during the Clone Wars. Designed by Kaminoan armorsmiths, clone armor consisted of a set of form-fitting plastoid plates attached to a black body glove. It could withstand impacts, pressure, heat and acrid vapors, yet was vulnerable to a straight laser blast. The armor was also standardized and produced rapidly equally the clones were genetically identical soldiers modeled on a human template, the Mandalorian foundling and compensation hunter Jango Fett.

The showtime version of clone armor was called Stage I clone trooper armor; improvements were made to the armor'southward blueprint over the course of the state of war, creating lighter and stronger plates. Stage I was eventually retired as Phase II clone trooper armor saw widespread distribution through the ranks of the Grand Ground forces of the Republic. By so, a wide array of armor variants were created for specialized troopers, such as the ARC trooper armor of Advanced Recon Commandos, the Katarn-course Commando Armor of clone commandos, and the Clone Swoop Armor of clone SCUBA troopers.

With the rise of the Galactic Empire, the new regime mothballed clone trooper armor, replacing it with the stormtrooper armor worn by Imperial stormtroopers. Yet, some clone veterans continued to wear their sometime armor years after their service in the Clone Wars, while mercenaries and pirates utilized scavenged armor plates. The legacy of clone armor ultimately outlived the Empire that fell to the New Republic, influencing a new model of armor made for a new generation of stormtroopers by the Outset Gild. This was followed past the ruddy armor of the Sith troopers—soldiers of the Sith Eternal cult—which was reminiscent of clone trooper armor, particularly the helmet's T-shaped visor.

Due to the combined influence of Royal and First Gild use, the heritage of clone armor was effectively appropriated by its successors, transforming what civilians once saw as a symbol of honorable defence and galactic salvation into a faceless icon of fascism. Still, the combined legacy of clone trooper armor and stormtrooper armor made white-armored soldiers i of the galaxy's most enduring symbols of military might.

Contents

• 1 Description
  • ane.1 Clone armor
  • i.ii Variant forms
    • i.2.ane Specialized clone armor
    • i.2.2 Jedi armor
• 2 History
  • 2.1 Clone Wars
  • 2.2 Purple Era
  • 2.3 Legacy
• iii Appearances
  • 3.1 Not-canon appearances
• 4 Sources
• 5 Notes and references

Description [ ]

Clone armor [ ]

The clones of Jango Fett wore standard white armor that was developed on their homeworld of Kamino.

Clone trooper armor was a set of white plastoid plates worn over a black body glove. Its form-plumbing fixtures design made the armor appear claustrophobic, but to the clones who trained with it from an early age the armor felt comfortable and secure.^[2] Though vulnerable to lightsabers^[viii] and directly laser blasts, clone armor was impervious to impacts, pressure, heat and acrid vapors. Its quality was such that by the fourth dimension Yard Main Yoda arrived on Kamino to accept charge of the army, the K Army of the Republic was considered the finest armed forces force in the galaxy.^[2]

Stage I clone trooper armor was the first iteration in the design of clone armor.^[i] Synthetic by Kaminoan armorsmiths, Phase I featured a life support organisation, a tracking device for monitoring troop movements and a brandish screen, all built inside the helmet.^[fourteen] The armor's design was likewise reminiscent of the Mandalorian armor worn by the clone template, the bounty hunter Jango Fett, especially in the helmet which featured a similar T-shaped visor.^[1] The armor could exist standardized and produced apace due to the fact that clone troopers were genetically identical soldiers.^[2] Despite the advantages it offered, Phase I was uncomfortable to wear due to the Kaminoans' unfamiliarity with man ergonomics.^[1]

Stage II clone trooper armor was the improved version of its Phase I counterpart, providing clone troopers with better vision besides as armor plates that were both lighter and stronger.^[2] The new armor was capable of supporting more than specialized equipment,^[15] such as an external respirator every bit the helmet did not feature an internal life support system.^[sixteen] Information technology was also more expensive to make, costing 3,000 credits^[4] per armor prepare equally opposed to Phase I'south 2,000 credits.^[three]

Variant forms [ ]

Specialized clone armor [ ]

HT-77 Cold Set on Armor immune clone troopers to operate in arctic weather.

The standard clone armor was supplemented by variant forms used by troopers in specialized roles, including pilots and flop-disposal teams. One oftentimes used armor variant^[ii] was the HT-77 Cold Assault Armor,^[3] which provided clone cold assault troopers with improved breath filters and insulation for chill conditions. Insulated armor was also required for hot weather,^[2] as in the case of the clone flametroopers who wore fire-resistant suits^[17] while wielding BT X-42 heavy flame projectors.^[3]

Advanced Recon Force Scout Troopers, also known as ARF troopers, were outfitted with Phase I ARF armor;^[18] designed for stealth and speed, it was a lighter version of the standard Phase I clone armor.^[two] Its successor, Phase II ARF armor,^[18] served a like role, consisting of lightweight armor fabricated for the reconnaissance work of clone picket troopers. ARF troopers also possessed a camouflaged version of their Phase Two armor, which they utilized in conjunction with All Terrain Reconnaissance Transports.^[ii]

Clone trooper pilots wore additional life-support gear and helmets with improved sensors.

The gear worn by clone gunners featured helmets with additional noise insulation and reinforced chest armor as safeguards confronting the intense recoil of the cannons they controlled. Clone ordnance specialists wore armor with bright orange markings, indicating to others the dangerous nature of their role. Autonomously from this aesthetic distinction, their armor offered no additional protection from explosions. Special ops clone troopers were trained for stealth and detecting enemies at a distance, and were given advanced gear that improved their senses.^[ii]

Clone trooper pilots considered themselves equally a brood autonomously, having been selected early in their development to acquire special skills. Their version of Stage I armor featured additional life-support gear and a helmet with improved sensors. Like rank-and-file clones, the clone pilot "Warthog" wore an updated rig—customized to his liking. Every bit the Clone Wars ground on, pilots received improvements to their gear. Stealth clone pilots wore their own unique armor due to their office in flying experimental starships. Past the final days of the war, pilots wore new flight gear, featuring open-faced helmets that offered superior visibility during space battles.^[2]

Clone SCUBA troopers were outfitted with Clone Dive Armor for underwater combat. As such, SCUBA gear was lighter than regular armor and featured fins, life-support equipment^[2]—providing oxygen to exhale^[4]—and propulsion packs.^[two] Information technology was likewise designed to assistance SCUBA troopers in their aquatic maneuverability and protected them from the pressure level levels of bounding main planets such as Monday Cala.^[4]

New armor was field-tested past Advanced Recon Commandos.

New improvements to the clone trooper armor were often field tested by the independent-minded, highly trained Advanced Recon Commandos, likewise known as ARC troopers, who were the first to receive new equipment. Their field reports helped researchers meliorate gear earlier it was distributed to the rest of the army.^[2] Like the standard clone trooper armor, there were 2 types of ARC trooper armor, first with Phase I ARC Trooper Armor. Information technology was a heavier version of the regular kit, particularly the forearms, thighs, and breast plate. Each armor set had an advanced helmet that contained a hardened long-range comlink; a kama that was worn around the waist, providing extra protection to the legs and groin; and a built-in load-begetting harness and survival pack.^[19]

Stage II ARC Trooper Armor was the upgraded version that the ARC troopers had switched to in the final battles of the Clone Wars. Having successfully field tested its Phase I predecessor, which served as the ground for the standard Phase II clone trooper armor, ARC troopers received similar gear while retaining the accessories that included additional armor, pauldrons, kamas, and survival packs.^[4]

Clone commandos wore Katarn-class armor, a heavier version of the standard-upshot clone trooper armor.

Katarn-class Commando Armor^[19] was a specialized fix of armor and gear used by clone commandos, who were considered to be amongst the most respected units in the clone army.^[2] A type of heavy and highly sophisticated clone trooper armor,^[19] Katarn-grade armor included a backpack that contained grenades and sabotage gear.^[fourteen]

The Mk I Katarn-class Commando Armor was a variant of the commando armor. Consisting of an environmentally sealed durasteel suit worn over an insulated and breathable, ballistic-fiber bodysuit, the Mk I version was considered i of the well-nigh advanced sets of armor always produced past the Commonwealth Military.^[xix]

Other units that received their own versions of clone trooper armor included Biker Advanced Recon Commando "BARC troopers," the 21st Nova Corps, and clone paratroopers. BARC troopers wore helmets designed to focus their attending forward, helping them to avert distractions that could exist deadly while traveling at high speed on a BARC speeder. The 21st Nova Corps, also known as Galactic Marines, had filtered visors that protected them from pollutants and other hazards. Clone paratroopers were specially trained for airborne assaults; as such, they wore kamas for boosted protection too equally unique helmets shaped like a "beehive."^[2]

Jedi armor [ ]

"Because of the Jedi'southward unsafe position on the front end lines, traditional robes weren't always enough to protect members of the Society from the constant barrage of attacks unleashed by the Separatists' droids. To meet this threat, many Jedi incorporated armor—usually modified from standard-issue clone trooper gear—into their ceremonial garb."

―Luke Skywalker ^[xx]

Jedi Generals wore a modified version of clone armor at the bidding of the clone troopers who were concerned for their safety.

Clone trooper armor also served equally the basis for a non-clone variant, tailor-made for the Jedi Knights who served as the clone troopers' commanding officers. Recognizing the Clone Wars as the new common reality that the Jedi Order faced, Jedi Generals adopted the modified clone armor known as Jedi Commander armor. This set of armor consisted of only the near important pieces in order to avoid hampering the Jedi's lightsaber forms and move.^[seven] It was more than expensive than the standard-issue clone armor, however, costing 5,000 Democracy credits.^[3]

Jedi Reconnaissance Armor was a lightweight^[4] variant of the Jedi Commander armor.^[seven] It was created in response to the concerns of their clone troopers, who feared that, despite their generals' connection to the Force, fifty-fifty the nigh experienced Jedi Chief could be felled by the sheer amount of blaster burn on the battlefield. The Jedi, therefore, wore light armor with limited protection confronting blasters, while still leaving them largely unencumbered in battle or overland travel. Reconnaissance Armor price more than regular clone armor, though at iv,000 credits^[4] it was cheaper than its standard Jedi counterpart.^[three]

History [ ]

Clone Wars [ ]

"Looks like we got ourselves a batch of shinies, Commander."
"Shinies, sir?"
"That'southward right. Your armor, it's shiny and new, simply similar you."

―Captain CT-7567 "Rex" and the rookie CT-1409 "Echo" ^[21]

During the Clone Wars, armored clone troopers served as a commonage symbol of the Galactic Republic.

At the start of the Clone Wars, clone troopers were outfitted with standard white armor that had been designed for their utilise on Kamino. The Kaminoans who created the clones were also responsible for the production of the regular army's armor, weapons and gear. Earlier attaining the condition of trooper, however, clone cadets wore a training variant of the standard-effect models used on the battlefield.^[2] When conflict ensued between the Galactic Republic and the Confederacy of Independent Systems, Grand Primary Yoda journeyed to Kamino to inspect the regular army that the Kaminoans had built for the Republic. He then departed for the Separatist earth of Geonosis^[5] at the head of the finest military forcefulness in the galaxy.^[2] Due to the armor's standard white advent, Republic citizens took to calling the clone troopers "Boys in White." This noncombatant-coined nickname was promoted through propaganda by the Commission for the Protection of the Commonwealth.^[22]

Initially, the Chiliad Ground forces of the Republic used colour splashes to distinguish clone trooper officers from the rank-and-file soldiers who served under their control. This approach to war machine rank identification was considered a benefit for non-clones on the battlefield as well as clones whose helmet displays had malfunctioned. It ultimately roughshod into disuse as a result of the Jedi'south growing influence on the clones. In one case in command of the clone ground forces, the Jedi Generals encouraged the clones to stop thinking in lockstep and express their individuality, causing entire clone units^[2]—from the 212th Assault Battalion and the 501st Legion, to the Coruscant Guard and the 104th Battalion's Wolfpack^[23]—to decorate their armor with unique color schemes and markings.^[2]

Phase II was the new and improved armor introduced to the ranks of the clone army as the Clone Wars footing on.

This new trend was taken a step further by Clone Commanders, who increasingly customized their armor over the course of the Clone Wars. Commanders often made extensive modifications to their armor, which came to reflect their experience on the battlefield as well equally their own inclinations. Officers such as Clone Captain CT-7567 "Rex" and Clone Commander CC-2224 "Cody" upgraded their kits with boom-resistant kamas, pauldrons, macrobinoculars, communication packs and other gear.^[two]

Improvements were made to the clone trooper armor throughout the Clone Wars, and were successfully field-tested by the elite ARC troopers. This led to a widespread distribution of the improved Phase II armor, resulting in the retirement of its Stage I predecessor every bit about all clones switched to the new kit past the final days of the disharmonize. By then, several variant forms had been created for the diverse specialized troopers in the Thousand Army of the Republic.^[2]

Imperial Era [ ]

"I'm proud of my service, but I actually hate this armor."

―Rex, referring to his Commonwealth service and stormtrooper armor ^[24]

Clone troopers retained use of their Stage Ii armor during the early days of the Galactic Empire.

The Phase II clone trooper armor was retained by the clones^[25] who served every bit the first generation of stormtroopers^[26] in the Galactic Empire that replaced the Republic afterwards the end of the Clone Wars.^[25] The Imperial Army ended the practice of using color to denote unit affiliation, which the clones had adopted afterward becoming more individualistic under the Jedi's influence. As a result, most of the remaining clone troopers took on the unformed appearance of white-armored soldiers, their individuality replaced by programmed conformity.^[27] Despite this, Imperial shock troopers retained the distinctive carmine markings which identified them equally members of the Coruscant Guard.^[25]

A variant of the clone trooper armor was designed to fit the individual forms of non-clone enlisted conscripts.

During the first days of the Imperial Era, Phase II-armored clone troopers were stationed throughout the newly-risen Galactic Empire, from their homeworld of Kamino in extragalactic infinite,^[25] to diverse planets such equally Saleucami^[28] and Pantora.^[29] By then, the Empire started using conscription as a toll-effective culling method to the Kaminoan cloning production. Recruited through Project State of war-Pall, ES-01, ES-02, ES-03, and ES-04 were enlisted as Elite Team Troopers.^[30] They were issued clone trooper armor that had been modified to fit the non-clone soldiers who were physically dissimilar from their clone counterparts as well equally each other. Additionally, their version of the clone armor was black instead of white, and their helmets featured green visors.^[31]

Clone trooper armor was rendered obsolete by the creation of the Royal stormtrooper armor.

The Phase 2 model was somewhen succeeded by the Imperial stormtrooper armor and, as a result, was mothballed past the Empire, leading to large stocks of clone trooper armor being recycled while its replacement was distributed throughout the ranks of the Stormtrooper Corps.^[2] By so, clones had been supplanted by nativity-born human recruits^[26] due to Galactic Emperor Darth Sidious' decision to shut downward Kamino's cloning facilities.^[32]

The clones Rex and Wolffe retained some of their armor plates long later their military service ended.

During the Purple Era, clone armor remained an occasional sight in the galaxy despite beingness retired past the Empire. While clone gear was scavenged for its armor plates past Mercenaries and pirates, a handful of renegade clones continued to wear the armor from their days as Republic soldiers.^[ii] Captain Rex, a retired clone trooper who supported the Alliance to Restore the Democracy, was highly song in his criticism of stormtrooper gear, referring to it equally "junk armor." He as well found his ability to see limited by the helmet's eye lenses, further adding to his frustration with the new kit.^[24] His opinions on stormtrooper armor were in wide contrast to his views on his former "Generation Ane" armor, which Rex continued to hold in loftier regard long later the Empire accounted information technology obsolete.^[13]

Moreover, a variant of the Phase 2 model was provided for the Purge Troopers, a death squad originally consisting of the concluding batch of Fett clones that had been repurposed to serve the Inquisitorius as Jedi hunters.^[10] Due to their part in the Great Jedi Purge of Order 66, these special forces units wore armor that offered some protection confronting lightsabers.^[33]

Legacy [ ]

"This garbage is zilch like clone armor."
"Looks a little tight on you, old human."
"Yep? Well, at least I know how to wear it."

―King and Kanan Jarrus, referring to stormtrooper armor ^[24]

Clone trooper armor served as the basis for an enduring symbol of armed services might that was inherited by First Society stormtroopers.

The legacy of clone trooper armor endured for decades and was remembered as the first phase in i of the most distinctive symbols of war machine might in galactic history. Imperial stormtrooper armor and its First Order successor were both influenced past the design of clone armor. The Galactic Empire had accordingly appropriated the clone troopers' legacy, which in turn transformed a symbol of accolade, defense and salvation into a "faceless icon" of fascism. Past the time of the New Democracy Era, First Social club stormtroopers were regarded as the next evolutionary stage for the galaxy'southward white-armored soldiers.^[34]

Like their stormtrooper counterparts, Sith troopers wore armor that was reminiscent of clone trooper armor.

During the final days of the First Gild-Resistance State of war, the First Order's Sith Eternal allies unveiled a new breed of soldier—the cherry-red-armored Sith troopers. Serving every bit the backbone of a secret ground forces on Exegol, Sith troopers were modeled on the stormtroopers who preceded them besides as the clone troopers, whose training and armor inspired that of their Sith counterparts. Equally a issue, the Sith trooper armor's helmet incorporated a version of the clone trooper armor's T-shaped visor.^[34]

Captain Male monarch considered Majestic body armor "garbage" compared to the armor that he wore during his service to the Galactic Commonwealth. When offered the chance to article of clothing it permanently as an Majestic stormtrooper, he refused out of loyalty to the Republic and his personal hatred for Royal armor. While Rex was critical in his views near stormtrooper armor, he all the same knew how to wear it due to his experience with clone armor.^[24]

Appearances [ ]

Non-catechism appearances [ ]

Sources [ ]

Notes and references [ ]

bromilowwasy1943.blogspot.com

Source: https://starwars.fandom.com/wiki/Clone_trooper_armor

Share this post